SENKO SI-200E
Fixed Gas Detector
The SI-200E is a fixed gas detector installed in a place where potential gas hazard
exists to measure oxygen, toxic gas and combustible gas. It shows not only the
concentration of gas but also diagnostic result of the unit itself through the LED
display and can be connected to the controller with a standard 4-20mA analog
output communication or RS-485 digital communication. Also, it is available to input
and set by connecting through Bluetooth.
exists to measure oxygen, toxic gas and combustible gas. It shows not only the
concentration of gas but also diagnostic result of the unit itself through the LED
display and can be connected to the controller with a standard 4-20mA analog
output communication or RS-485 digital communication. Also, it is available to input
and set by connecting through Bluetooth.
Features
• Simple to install, easy to use the product
• Extractive pump system which has 2years life time (Sampling up to 30M)
• Smart sensor cartridge with on board
• Large bright graphic LCD based on Intuitive icon with various expressions
• 3 built in relays for Alarm 1st , 2nd and Fault
• Ethernet (PoE) communication
• Optional Pyrolyzer module
• 4-20mA analog output with event reporting and fault
• Modbus/TCP Ethernet can be easily connected to all control and alarm systems ports
• Update the latest version of firmware available via the web
• RS-485, TCP Ethernet to connect alarm system and communication
• Detects gas which is parts-per-billion(ppb) levels
• Extractive pump system which has 2years life time (Sampling up to 30M)
• Smart sensor cartridge with on board
• Large bright graphic LCD based on Intuitive icon with various expressions
• 3 built in relays for Alarm 1st , 2nd and Fault
• Ethernet (PoE) communication
• Optional Pyrolyzer module
• 4-20mA analog output with event reporting and fault
• Modbus/TCP Ethernet can be easily connected to all control and alarm systems ports
• Update the latest version of firmware available via the web
• RS-485, TCP Ethernet to connect alarm system and communication
• Detects gas which is parts-per-billion(ppb) levels
Specification
Item | Specification |
---|---|
Dimensions | 169(W) x 188.5(D) x 107(H)mm |
Weight | 2.4kg |
Operating Power | DC : +24Vdc ±10% |
Power Consumption | 3.6W @ ±24Vdc |
Operation Mode Display | FND, Gas Concentration, Alarm, Malfunction |
Relay | 1st Alarm, 2nd Alarm, Fault Alarm (Rated 2.0A @ 30Vdc) |
Analog Output Signal | 4-20mA |
Digital Output Signal | RS-485 |
Measuring Type | Diffusion Type |
Operating Temperature | -40℃ ~ +60℃ |
IP Rating | IP65 |
Input and Setting | 4 Buttons, RS-485, Bluetooth |
Device Warranty | 2 years |
Sensor Warranty | 1 year |
Wireless Interface | RS-485 Modbus, HART (Optional) |
Cable | 4-20mA, DC, Relay : Maximum 14 AW |
Certification | IECEx : Ex db llC T6 Gb, ATEX : Ex db llC T6 Gb |