Product Line

Pure Water/Ultra Pure Water
  • Facebook
  • LINE
  • Twitter
  • LinkedIn
UP-100 TOC Analyzers


TOC Analyzers

"Particle monitoring and control of ultrapure water (UPW) are becoming more
and more critical to a growing array of manufacturing industries. Advances
in precision manufacturing technologies such as flat panel display (FPD) and
hard disk drive (HDD) components, require that contaminant particles in
process fluids be measured to as small as 0.1 μm.
Ultrapure-100 provides a fully integrated solution to 0.1 μm particle monitoring
in DI water applications. Whether your requirement is troubleshooting, or
simply the monitoring of critical locations within your facility’s ultrapure water
plant, you will find Ultrapure-100 an effective and affordable addition to your
online process analytics.
The Ultrapure-100 combines robust opto-mechanics, counting and communication
electronics, and characteristic flow control system all within one instrument
to provide unparalleled performance. In high-pressure applications, such as
DI water plant monitoring, the total system flow rate is in excess of 1.0 LPM.
This results in obviously fast clean up and recovery times and out-standing flow
regulation, even with dynamic inlet pressures. For hot DI water monitoring
applications, the Ultrapure-100 is the ideal solution and is rated to 80o C.
Ultrapure-100 is supplied with an easy to use Windows®-based configuration
utility which makes installation and integration quick and easy. Parameters
such as number of channels, sampling interval, and 4–20 mA analog output
scaling can be quickly tailored to specific requirements. Real time system
diagnostics ensure that data integrity is never compromised. Calibration is
fully traceable to NIST standards."
View More Details
"Size Channels (μm) :0.1 μm, 0.2 μm (plus 0.5 μm and 1.0 μm optional)
Display Resolution :0.01 counts/mL
Zero Count Rate :Meets JISB 9925
System Flow Rate: >1 LPM
Sample Flow Rate: 100 mL/min (regulated for inlet pressure between 30 and 100 psi)
Light Source: Laser Diode
Inlet Pressure 100 psig maximum (690 kPa)
7.0 psig minimum
Temperature Operating 7°C to 40°C (41°F to 104°F)
Sample 7°C to 80°C (41°F to 176°F)
Power 90 to 260 VAC, 50/60 Hz
Power Consumption 80 VA maximum (0.8 A at 100 V)
I/O Connections Analog Opto-isolated 4-20 mA output
(2 channels standard, 4 channels optional)
RS-232 Serial connection for set-up
Electrical I/O connections are located on bottom of unit,
with protective cover
Indicators Power, Laser Condition, Leak Status
Fluid Connections SS ¼ inch Swagelok (inlet and outlet)
External flowmeter
Enclosure Aluminum alodine with painted external finish
Size 305 w x 203 h x 190.5 d mm (12 x 8 x 7.5 inches)
Relative Humidity 90% maximum, non-condensing
Accessories Included Power Supply Unit, Software Setup Utility, ¼ inch Nylon Sample
and Drain Tubing Power Cord, Operator Manual
Optional Accessories Wall Mounting Brackets, Data Trending Software"
3Online Shopping

Online Shopping

    Check Out

      3Inquiry Cart